WinCK filling indicator

WinCK-IND5300FL weighing instrument

1. Single-speed and dual-speed automatic quantitative filling
2. Dual-core high-speed A/D sampling technology
3. Built-in gross weight filling, net weight filling, and weight reduction filling modes
4. Superior EMC and RFI performance, meeting industrial-grade anti-jamming requirements
5. Both serial ports support industrial standard communication protocol Modbus RTU
INQUIRY

Features:
1. Single-speed and dual-speed automatic quantitative filling, high-precision filling under large flow, the flow rate of the small valve can reach 950g/s, which greatly improves the filling accuracy and production efficiency;
2. Filling self-learning function, automatic correction after each filling, to ensure the filling accuracy of each bottle;
3. Dual-core high-speed A/D sampling technology, with adjustable sampling rate of 350 Hz or 700 Hz
4. Intelligent software filter model, perfect realization of high precision at high speed
5. Built-in gross weight filling, net weight filling, and reduction filling modes, which can be controlled independently without PLC
6. The built-in photoelectric isolation output port directly controls the large and small valves, forming real-time closed-loop feedback control
7. The automatic and manual modes of quantitative filling can be freely selected, which greatly facilitates operation and maintenance;
8. The automatic peeling function overcomes the influence of the inconsistent weight of the filling container on the filling accuracy;
9. The filling preset points can be set freely, which adapts to the quantitative filling requirements of various weight ranges;
10. Automatic diagnosis, fault alarm, improve the reliability of system work;
11. Safety inspection, only the bottle that meets the tare weight range is in place, the filling will start;
12. Self-locking control, before filling, check whether there is a bottle, and do not fill if there is no bottle;
13. Tolerance detection, automatically judge whether the filling is qualified or not, and output the corresponding control signal;
14. High-performance anti-vibration filtering technology, effectively avoiding errors caused by the vibration of the scale body
15. Dual serial ports (RS232 and RS485) with isolation protection to meet various industrial needs, and there is an Ethernet version
16. Both serial ports support industrial standard communication protocol Modbus RTU
17. Optically isolated four digital input/four digital output (4DI/4DO) control interface
18. Digital output (4DO) control interface can directly drive solenoid valves within 5W and directly control filling valves
19.24VDC safety power supply, adapt to industrial scene
20. Superior EMC and RFI performance, meeting industrial-grade anti-jamming requirements
21. Use high-reliability and convenient on-site connection connectors
22. SMT surface mount technology improves the reliability and stability of the product

Working mode:
1. Only weighing mode, preset point comparison
2. Gross weight filling mode
3. Net weight filling mode
4. Weight-reduced filling mode

Software features:
1. Original high-speed software filtering model, which greatly improves the high precision at high speed
2. Support most of the workflows such as gross weight filling, net weight filling, and reduction filling
3. The display division is 1000～100000d, optional
4. MODBUS RTU communication function, can carry out data interaction and status transfer with the host computer
5. Efficient Ethernet interface to better satisfy multi-channel weighing applications
6. The system software can be upgraded or updated through RS-232 at any time to meet various non-standard requirements of customers
7. Dynamic zero tracking and dynamic detection function.

Main performance:
1. High precision, high resolution - type A/D conversion, 400Hz / 800Hz sampling
2. Temperature coefficient of the controller: 2 ppm/℃
3. Non-linearity of the controller: 0.005%
4. Minimum resolving power: 0.5µv
5. Verification graduation 3000e; maximum display graduation 100000d
6. A/D conversion speed is 350Hz, and the high-speed setting is 700 Hz
7. Industrial-grade anti-interference design, passed EMC, RFI and other tests

Power supply:
1. Voltage range: 18V～36VDC power supply, the maximum power consumption is 3 watts.
2. The controller needs a good grounding wire
3. The controller cannot share a power supply with equipment that is prone to power supply noise

Operating environment:
1. Operating temperature is: -30+60℃, humidity is 10%~80%, no condensation
2. Storage temperature is: -40+70℃, humidity is 10%~90%, no condensation

Dimensions:
1. Controller shell: aluminum alloy is stretched as a whole to enhance EMC performance
2. Installation method: rail installation
3. Product size: 51x117x99mm